Fiber Laser Cutting Machine Cost: What Determines the Price

Short answer: There is no single price for a fiber laser cutting machine. The cost is built from specific factors: laser source power, cutting-table size, whether you need a single platform, a dual platform or tube cutting, the cutting head, controller and laser source, accessories such as an air compressor and voltage stabiliser, and, if you add a CNC press brake, its tonnage, bending length and number of axes. Define these first, then ask for an itemised quotation based on them.

This guide explains the factors that set the fiber laser cutting machine cost and the cost of a CNC press brake, what a quotation should include, and how to prepare a request that lets you compare offers fairly. It does not quote fixed prices or capacities; the sizes and components mentioned are taken only from the Eirmac catalogue.

Read also: Fiber Laser Cutting & CNC Press Brake Buying Guide · Eirmac · How to Choose a Production Line Supplier in China · Production Line Spare Parts · النسخة العربية · All guides

What goes into the cost of a laser cutting machine?

The machine itself is only one part of the budget. A complete estimate covers:

  • The machine: frame, cutting table, laser source, cutting head and controller.
  • Cooling: a water chiller for the laser source and cutting head.
  • Accessories: air compressor, voltage stabiliser, fume extraction and, where needed, a second exchange platform or a tube cutting unit.
  • Software: drawing and nesting software and operator training.
  • Complementary machines: a CNC press brake and tooling, or hydraulic shears, if your parts need bending or straight cutting after the laser.
  • Shipping, installation, training, spare parts and consumables.

After-sales service: for what to get in writing in the quotation on installation, commissioning, training, documents, warranty, technical support and spare parts, see Production Line After-Sales Service.

The main factors that set the price

1. Laser source power

Power sets the maximum thickness you can cut and the cutting speed. Higher power raises the price, so choose it from the maximum thickness you cut regularly, ideally after test cuts on your own samples.

2. Cutting-table size

Per the Eirmac catalogue, single-platform machines are listed with cutting areas 3015 (3000×1500), 4015 (4000×1500), 4020 (4000×2000), 6015 (6000×1500), 6020 (6000×2000) and 6025 (6000×2500) mm. A larger table costs more and needs more floor space; the right size follows the sheet sizes available in your market.

3. Single platform, dual platform or tube cutting

The Eirmac catalogue lists a dual-platform version as an option, and separate tube laser cutting machines with models (length × diameter) 6000ר120, 6000ר160 and 6000ר240 mm. A second platform cuts loading time and adds cost; tube cutting needs a dedicated machine or unit.

4. Laser source, cutting head and controller

Per the Eirmac catalogue, the standard single-platform configuration includes an Empower controller, a Raytools cutting head, a Raycus laser generator and an S&A water chiller, with options such as CypCut control or a BOCI head. Changing any component from the standard configuration changes the price, so compare quotations on the same components.

5. Press brake: tonnage, bending length and axes

Per the Eirmac catalogue, hybrid press brakes are listed from 70T/2500 up to 320T/4000 with 6+1 axes as standard, and servo torsion-axis press brakes from 30T/1600 to 300T/4000, with optional DELEM, CYBELEC or ESA controllers. Tonnage, bending length, number of axes, controller and tooling all affect the price.

6. Utilities and site

Available and stable power, cutting gas (compressed air, nitrogen or oxygen), fume extraction and floor and foundation preparation all affect the total budget.

Cost drivers at a glance

This table is for illustration only; it is not a price list or specification. Actual details are set in the quotation.

Cost driverWhy it affects costWhat to decide or send
Laser powerSets maximum thickness and cutting speedMetals and maximum thickness cut regularly
Table sizeA larger table costs more and needs more spaceSheet sizes available in your market
Dual platform or tube cuttingExtra equipment or a dedicated machineWhether you cut sheet only or tubes as well
Main componentsLaser source, cutting head and controllerAny preference for specific components
Press brakeTonnage, bending length, axes and toolingLargest part you bend and its thickness
AccessoriesAir compressor, voltage stabiliser, fume extractionPower and gas available on site
Software and trainingNesting software and operator trainingNumber of operators and interface language

What to send for an accurate quotation

  1. Metals: mild steel, stainless steel, aluminium, galvanised sheet.
  2. Maximum thickness you cut regularly, and the most common thickness.
  3. Sheet sizes you use.
  4. Whether you need tube cutting, and tube sizes if so.
  5. Drawings or photos of the parts you make.
  6. Monthly output and number of shifts.
  7. Whether you need a press brake, with the longest bend and thickness.
  8. Available power, country and delivery location, and whether you need installation and training.

Common mistakes that raise the cost

  • Buying more or less laser power than you need without test cuts on your own samples.
  • Comparing quotations with different components (laser source, cutting head, controller) as if they were the same.
  • Choosing a table smaller than the sheet sizes available in your market.
  • Choosing a press brake whose length or tonnage does not fit your largest part.
  • Ignoring gas, electricity and consumables when comparing offers.
  • Not preparing the floor and power supply before the machine arrives.

Running costs after production starts

  • Electricity for the laser source, chiller and motors.
  • Cutting gas: compressed air, nitrogen or oxygen depending on the metal and edge finish.
  • Consumables: nozzles and protective lenses.
  • Press brake tooling and its renewal.
  • Labour and training on software and operation.
  • Routine maintenance of the chiller and motion system.

How Eirmac and Rendat help

Rendat is an industrial group based in Yiwu, China. Its Eirmac brand covers metal-working equipment: fiber laser cutting machines, CNC press brakes, CNC machines and steel processing lines. We propose a suitable configuration based on your metals, thicknesses and output, and itemise components, accessories and options for shipping, installation and training in the quotation, plus spare parts through RendatSP.

FAQ

Can I get a fiber laser price without details?

An accurate figure is not possible before the metals, maximum thickness, table size and required components are known. Any number given without this data is an unreliable estimate.

What affects the price of a laser cutter most?

Laser source power and cutting-table size are among the main factors, followed by the main components and accessories such as a second platform or a tube cutting unit.

Do I need a press brake with the laser?

If your parts need bending after cutting, usually yes. Press brake tonnage and length are chosen from the largest part you bend and its thickness.

What sizes does the Eirmac catalogue list?

The Eirmac catalogue lists single-platform cutting areas from 3000×1500 to 6000×2500 mm, and tube laser cutting models 6000ר120, 6000ר160 and 6000ר240 mm.

What does the quotation include?

It lists the proposed machine, its main components and accessories, with options for shipping, installation, training and spare parts according to your project.

Request a fiber laser cutting machine quote

Send us your metals, maximum thickness, sheet size, monthly output and country, and we will prepare a quotation based on your project. Contact us or message us on WhatsApp at +86 181 5871 1787.