Quick answer: When buying a plastic injection molding machine or a blow / extrusion line, define the product (part, bottle, pipe, film), resin, output and mould or die needs first. Then compare clamp force or line layout, automation, utilities and after-sales support. Renplas is the Rendat group brand for plastic machinery.
This guide is for factory owners comparing injection and blow/extrusion options. It does not list catalogue prices or fixed tonnages — those come from a project study. Related: Arabic plastics & packing guide and Niopac for end-of-line packing.
Injection molding vs blow molding vs extrusion
| Process | Typical products | What you size |
|---|---|---|
| Injection molding | Caps, containers, technical parts | Clamp force, shot size, mould |
| Blow molding (incl. stretch blow) | Bottles, jars, hollow parts | Cavity count, bottle range, output |
| Extrusion | Pipes, profiles, sheet, film | Screw/die, haul-off, downstream |
Buying checklist
- Product and resin: PE, PP, PET, PVC and fillers change screw, barrel and die design.
- Output: parts or metres per hour, and how many SKUs you will run.
- Tooling: who designs and trials the mould or die; spare cavities for wear parts.
- Automation: robots, conveyors, in-mould labelling, packing — often with Niopac.
- Utilities: power, cooling water, compressed air, chiller capacity.
- Spare parts and training: plan critical spares via RendatSP from day one.
- Site layout: raw material storage, drying for hygroscopic resins, finished goods flow.

Questions to ask any supplier
- What references exist for my resin and product family (without inventing client names here)?
- What is included: machine only, mould trial, installation, training?
- What is the recommended critical spare list?
- How are safety guards and CE or local compliance handled for my country?
Local permits and electrical standards vary by country — confirm before you ship.
How Renplas fits
Renplas supplies plastic machinery within the Rendat group: injection molding machines and extrusion, film and recycling lines for manufacturers of plastic products, pipes and packaging. Engineers size the line after they know your product drawing, resin and target output. Packing can be completed with Niopac; long-term parts through RendatSP.
FAQ
How do I choose clamp force?
From projected area of the part, cavity count and material pressure — your mould designer and supplier calculate it; do not guess from a round number online.
Should I buy moulds with the machine?
Often yes for the first SKUs, so trials happen before shipment. Multi-cavity tools add cost but raise output.
What about recycled material?
Possible on many lines with the right filtration and screw design; state PCR percentage in the brief.
How long to install?
Depends on civil works, utilities and mould readiness. Ask for a schedule with the quotation.
What should I prepare at the factory site before the line arrives?
Agree the line layout with your supplier first, then prepare the building, floor, power, water, compressed air and drainage to match the supplier’s utility list. See the guide to factory site preparation before installing a production line.
Request a quotation
Send product drawings or samples, resin, target output and country. Request a quote or WhatsApp +86 181 5871 1787.
Related links
- Renplas brand page
- Plastic manufacturing plant cost: what determines the price
- PET Blow Molding Machine Buying Guide for Water and Beverage Bottles
- بالعربية: دليل شراء ماكينة نفخ عبوات PET لمصانع المياه والمشروبات
- Niopac packing
- Arabic plastics guide
- RendatSP spare parts
- French version of this guide
- Spanish version
- Portuguese version